![]() If it’s a regular USB drive, then it will be listed as a USB Mass Storage Device.Look for the listing which is related to your USB driver. Find, and expand “Universal Serial Bus controllers” in the Device Manager window. Press Win+X+M to open the Device Manager. Run the Hardware and Devices Troubleshooter.ġ] Reinstall Universal Serial Bus controllers driverĪ driver issue can be fixed by reinstalling the USB or Universal Serial Bus controllers driver from the Drive Manager.Install Universal Serial Bus controllers driver in Compatibility mode.Turn off Power Saving Option for the USB driver.Reinstall Universal Serial Bus controllers driver.We will try four suggestions here, but before you begin, check the USB on another PC, and also connect another USB to this PC and see if there is any fault with the USB itself: I had this exact problem, this is what Blue sent me and it fixed the problem. Worth noting that my keyboard also takes a while to boot up, hence that I need another key board to enter the BIOS.Įdited by JHerbert, 11 October 2020 - 10:57 PM. However, on my computer it doesn't recognize it when waking up. I tested this with my laptop and it seems to be working fine when waking up from sleep mode. What I do notice is with this model blue yeti is that it takes a bit longer to be recognized when plugged back in.Īnd my other devices flash led when booting up, the yeti stays on, no sound.just the led. I have also noticed in my BIOS that there is a USB section, is there anything there worth changing?Įdit: tried messing with some settings in the BIOS but it doesn't seem to do anything. I'm not very tech savvy, I'm assuming that "powercfg.exe -h on" well revert the changes? I have tried all those steps, sadly the issue still persists. Shutdown and reboot and see if the mic is detected. Save any open programs before doing the commands The above disables FastStartup, removes the hiberfil.sys file and shuts down the computer. Type CMD in the search box Right Click > Run as Admin. Sometimes things can get wonky with the hiberfil.sys file that is used. Windows itself has FastStartup enabled by default. If your UEFI/BIOS has a QuickStart setting disable it. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |